Flashings
Flashings

Outside and inside corners, gussets, pilasters

Outside and inside corners, gussets, pilasters

 

▲ top
O-METALL Angular sheet

Angular sheet (9)

A gusset can, for example, be used as an outer corner of buildings on which trapezoidal sheets were laid vertically as a wall

O-METALL simple outer and inner corner (13)

Simple outer and inner corner (13)

Simple outside and inside corner  // By determining on which side of the component the colour coating is, it functions as external or internal corner

O-METALL Inner corner with flap (17)

Inner corner with flap (17)

The inside corner is used for corner cladding on buildings // Used internally and externally

O-METALL reinforced inner corner (17A)

Reinforced inner corner (17A)

The inside corner with reinforcing corrugation for added stability // Used internally and externally

Outer corner with flap (17B)

Outer corner with flap (17B)

Outside corner with flap // Used internally and externally

Reinforced outside corner (17C)

Reinforced outside corner (17C)

Reinforced outside corner // Due to its special shape, high stability and very refined and pleasing appearance

O-METALL Pilaster (21)

Pilaster (21)

Pilaster in a simple design // Used for example for the butt joint of trapezoidal sheets and corrugated sheets of exterior and interior walls 

O-METALL Pilaster shadow gap (21A)

Pilaster shadow gap (21A)

Pilaster shadow gap // Their shape makes it possible to mount a façade with a shadow gap

Drip edge, bracket, trimming and U-profiles

Drip edge, bracket, trimming and U-profiles

 

▲ top
O-METALL Profile edging (15)

Profile edging (15)

Profile edging with flaps // For example, is used for binding sandwich panels 

O-METALL Drip edge (18)

Drip edge (18)

Drip edge with negative chamfer // Can be used as the lower end of a wall made of trapezoidal sheet metal, sandwich panels or corrugated profiles

O-METALL Bracket for wall profiles (25)

Bracket for wall profiles (25)

Bracket for wall profiles // As a mounting aid for sandwich walls or for placing other heavy trapezoidal sheet - wall coverings // Material thickness should be at least 1.5 mm

O-METALL Simple U-profile (26)

Simple U-profile (26)

Simple U-profile // Can be used as floor rail or ceiling guide for assembly of interior walls // Many other uses possible

O-METALL U-profile with flap (26A)

U-profile with flap (26A)

U-profile with flap // Can be used as a ground rail or ceiling guide in the assembly of interior walls // Many other uses possible

Window sills, lintel profiles and reveal profiles

Window sills, lintel profiles and reveal profiles

 

▲ top
O-METALL Reveal profile (22)

Reveal profile (22)

Reveal profiles // Used for window, door and gate reveals

O-METALL Bracket for reveal profile (22A)

Bracket for reveal profile (22A)

Bracket for reveal profile // Used for window, door and gate reveals

Sturzprofil (23)

Sturzprofil (23)

Sturzprofil

O-METALL Window sill (23A)

Window sill (23A)

Window sill // Functional and simple window sill individually produced for your project