Flashings
Flashings

Flashings for the roof

Ridge caps, fan ridges, flashings, hip caps

Ridge caps, fan ridges, flashings, hip caps

 

▲ top
O-METALL Single ridge cap (1)

Single ridge cap (1)

Ridge cap easy & cheap // Also known as first cap, interior use // Flashing angle according to your roof pitch 

O-METALL inner ridge cap

Inner ridge cap (1A)

First cap inside two flaps // Application especially for highly insulating sandwich roofs // Should always be used in conjunction with sealing tapes

http://o-metall.com/images/icon_blank.png

O-METALL Ridge cap with flaps (1B)

Ridge cap with flaps (1B)

Ridge cap exterior with two flaps // flap is for stability and to protect the cut edges against corrosion // Use with profile fillers // Can be used as ventilation ridge when profile fillers are not used

http://o-metall.com/images/icon_blank.png

O-METALL ridge cap for metal roofing tile

Ridge cap for metal roofing tile (1C)

Ridge cap for metal roofing tile // In this flashing, the focus is on a beautiful and aesthetic form

O-METALL toothed ridge cap in one piece

Toothed ridge cap in one piece (2)

Toothed ridge cap in one piece // teething available for a variety of profile geometries

O-METALL unidirectional toothed ridge cap (3)

Unidirectional toothed ridge cap (3)

Unidirectional toothed ridge cap // Used for example if only one half of the roofs will be renewed

http://o-metall.com/images/icon_blank.png

O-METALL two-piece toothed ridge cap (4)

Two-piece toothed ridge cap (4)

Two-piece, toothed ridge cap // Simplifies laying especially when the left and right half of the roof are displaced

O-METALL two-piece toothed ventilation ridge (7)

Two-piece toothed ventilation ridge (7)

Two-piece, toothed ventilation ridge // Can be used in all buildings where roof ventilation is desired via the ridge

O-METALL toothed ventilation ridge with slots (7A)

Toothed ventilation ridge with slots (7A)

Toothed ventilation ridge with ventilation slots // Ideal for building ventilation over the ridge // Through special ventilation geometry, high degree of rain and snow protection

O-METALL three-piece toothed ventilation ridge (7C)

Three-piece toothed ventilation ridge (7C)

Three-piece, toothed ventilation ridge // Ventilation cross-section can be varied with different cuts

http://o-metall.com/images/icon_blank.png

O-METALL two-piece ventilation ridge with flap

Two-piece ventilation ridge with flap (7D)

Two-piece, toothed ventilation ridge // Can be used in all buildings where roof ventilation is desired via the ridge

O-METALL slotted ventilation ridge with flaps

Slotted ventilation ridge with flaps (7E)

Toothed ventilation ridge with ventilation slots and flaps // Ideal for building ventilation over the ridge //  High degree of rain and snow protection due to special ventilation geometry

O-METALL three-piece ventilation ridge with flaps (7F)

Three-piece ventilation ridge with flaps (7F)

Three-piece ventilation ridge with flaps // Ventilation cross-section can be varied by different cuts

O-METALL simple valley flashing (24)

Simple valley flashing (24)

Flashing, simple design // Cuts depending on the extent of the roof valley

O-METALL valley flashing with reinforcing seam (24A)

Valley flashing with reinforcing seam (24A)

Valley flashing with reinforcing corrugation // This shaping enhances stability

O-METALL - valley flashing with increased water run

Valley flashing with increased water run (24B)

Valley flashing with increased water run for increased flow volume // Especially for large roofs and long roof valleys 

Suspended ridge, ridge tooth plates, wall connections, fascia covers

Suspended ridge, ridge tooth plates, wall connections, fascia covers

 

▲ top
O-METALL toothed suspended ridge

Toothed suspended ridge (5)

Toothed suspended ridge with drip edge // End plate for pitch roofs

O-METALL suspended ridge with flap (5A)

Suspended ridge with flap (5A)

Suspended ridge with flap and weather drip // As a pent roof closure

O-METALL toothed ridge panel (6)

Toothed ridge panel (6)

Toothed ridge panel  // Tooths available for many different profile geometries // Can be used for penthouse roofs against a brick wall, for example

O-METALL toothed ridge plate with flap (6A)

Toothed ridge plate with flap (6A)

Toothed ridge plate with flap // Can be used for penthouse roofs against a brick wall, for example

O-METALL wall connection (10)

Wall connection (10)

Side wall connection // Seal on-site with capping strip or sealing material 

O-METALL wall connection with flap (10A)

Wall connection with flap (10A)

Side wall connection with flap // Seal on-site with capping strip or sealing material 

O-METALL cover profile for attics (12)

Cover profile for attics (12)

Cover profile for attics // Elegant component for visual enhancement

O-METALL simple cover for attics (12A)

Simple cover for attics (12A)

Simple cover for attics with flaps

Verges, gable closures

Verges, gable closures

 

▲ top
O-METALL gable closure (8)

Gable closure (8)

Verge for gable-side closure of the roof

O-METALL gable closure (8A)

Gable closure (8A)

Gable closure with underside profile // This gable closure is especially suitable for small roofs, because the leg on the roof is kept very small by the profile underside

O-METALL gable closure (8B)

Gable closure (8B)

Gable closure with purlin edging and drip edge

O-METALL gable closure (8C)

Gable closure (8C)

Gable closure with reinforcing corrugation and weather drip

O-METALL gable closure (8D)

Gable closure (8D)

Gable closure with wind deflector and weather drip

O-METALL simple verge (13)

Simple verge (13)

Verge easy & cheap

O-METALL simple verge with flaps (13A)

Simple verge with flaps (13A)

Simple verge with flaps // Flaps for increased stability

O-METALL gable closure (20)

Gable closure (20)

Gable closure for screwing in the waterway with purlin edgins and drip edge

Guttering, water brakes, side skirting, snow guard rails

Guttering, water brakes, side skirting, snow guard rails

 

▲ top
O-METALL gutter cap with flap (11)

Gutter cap with flap (11)

Gutter cap with flap to screw under the roof panel // Closes the gap between the lower edge of the panel and the upper edge of the rain gutter

O-METALL simple gutter cap (11A)

Simple gutter cap (11A)

Simple gutter cap  // Functional and cheap

O-METALL water brake with weather drip (19)

Water brake with weather drip (19)

Water brake with weather drip // Ensures that water does not overshoot the down spout in the event of heavy rain  // For sandwich roofs, the PU foam is protected from UV exposure and covered

Snow guard bar (19A)

Snow guard bar (19A)

Snow guard bar for mounting on the roof

Snow guard bar with water brake (19B)

Snow guard bar with water brake (19B)

Snow guard bar combined with a water brake // One flashing, one price, two functions

Other roof flashings

Other roof flashings

 

▲ top
O-METALL adjustment panel (14)

Adjustment panel (14)

Adjustment panel, used for example for pipe penetrations