SANDWICH PANEL FIRE PROTECTION WALL SB

*Standard width, other wall widths on request / Dimensions Profile sketch in millimetres

PRODUCT PROPERTIES – THE FIRE-RESISTANT WALL PANEL WITH VISIBLE FIXING (SB)

PROPERTIES	UNIT	BSW50 SB	BSW60 SB	BSW80 SB	BSW100 SB	BSW120 SB	BSW150 SB	BSW170 SB	BSW200 SB	BSW220 SB	BSW240 SB
CORE THICKNESS (h)*	mm	50	60	80	100	120	150	170	200	220	240
U-VALUE	W/m².K	0.76	0.64	0.49	0.39	0.33	0.27	0.23	0.20	0.18	0.17
FRC (on request)	min	30	30	60	120	120	240	240	240	240	240

*Attention! Our nominal thickness corresponds to the thickness of the isolation. It is measured at the leanest place of the panel.

TECHNICAL PROPERTIES

OUTER SHELL	Optical profile slightly lined (LL), optionally micro lined (ML) or flat (GL) Steel thicknesses 0.50mm – 0.63mm – on request 0.75mm Polyester colour coating (POL) 25µm standard, other coating systems available up to 200μm
INSULATION CORE	Mineral wool insulation core, shear-resistantly connected with outer and inner shell Density approx. 100kg/m³ Euroclass A2-s1,d0, non-combustible
INNER SHELL	Optical profile slightly lined (LL) Heat-treated fully galvanised steel, steel thicknesses 0.50 to 0.63mm DU-coating similar to white standard
OTHER	CE-marking according to EN 14509
EXTRAS (on request)	Other effective widths (up to max. 1200mm) are possible Outer and inner shell available in aluminium – colours upon request FRC-certificate available on request Acoustic perforation

PRODUCT CHARACTERISTICS

O-METALL^® fire protection panels for wall with „visible fixing“ (SB) are particularly suitable when high demands are made in regards to fire protection and/or sound insulation. Depending on the use, the size or the location of the building specific fire protection requirements will maybe have to be observed and this will make it necessary to go for fire resistant O-METALL^® fire protection panels. For technical reasons, the panel joint and the effective width may vary depending on the production line and core thickness in question.

SUITABLE ACCESSORIES